Tungsten cutting ring, material is 93%W Ni Fe alloy, first make ring, then, cutting thin slot, min slot around 3mm.
Standard:
ASTM B777
ASTM B7725
AMS-T-21014
We can do all kinds of shape rings, small ring we did, OD10 X ID5MM X L, Max size we can do around OD400 X ID150-300 X around 250-300mm.
Also we can do the tungsten alloy rings with thin slot, cutting slot approx 0.3mm, cutting ring specification we did: min OD50XID43xL, max
size ID220MM X ID180mm X length, cutting slots 0.3-0.5mm.
| Material |
93%W Ni Fe alloy |
| Density |
17.25-17.85g/cc |
| Hardness |
33Max |
| Ultimate Tensile strength |
758Mpa |
| Yield strength at 0.2% offset |
517Mpa |
| Elongation |
5% Min |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}